If your dishwasher has a digital display, the error codes below will be displayed if there is a problem with your appliance.


Error Code

Meaning

Causes

Solution

E1

Longer inlet time

Water tap is not open, water intake is blocked or water pressure too low

  • Ensure the tap is fully open and have good flow of water
  • check the inlet valve/hose for any debris which may reduce the flow of water in to the dishwasher
  • Check for kinks on the supply hose

E3

Heating Fault. Not reaching required temperature

  • Jammed filter
  • Heater Failure
  • Remove the coarse and fine filter and clean it. Don’t push the waste in.
  • Call a technician to check the heater/replace the heater

E4

Overflow

  • Blocked drain hose
  • Bent drain hose
  • Blocked filter
  • Drain hose installed too high
  • Check the drain hose for debris
  • Check if the drain hose is kinked/bent
  • Remove the coarse and fine filters at the bottom of the dishwasher and clean any debris. Don’t push the debris in. Instead throw them away manually.
  • Drain hose should be installed between 400mm to 1000mm high

E6 & E7

Open circuit & Short circuit

  • NTC thermistor/PCB Failure
  • Call a service technician to check the fault

E8

Failure of orientation of distributary valve

Open circuit or break of distributary valve

  • Call a service technician to check the fault
EcWashing control system failureElectronic or Motor Failure
  • Call a service technician to check the fault
EdFailure of connection between display unit and control systemWiring failure between the two devices
  • Call a service technician to check the fault
EHThe cover does not open or close properlyThe cover device motor damaged or debris stuck
  • Check if there is any debris on the cover. If not, call a technician to check the fault.














































If your dishwasher does not have a digital display, light will flicker on the "Glass, 90 Min or Rapid"symbol on the control panel. Refer to the table below for these types of error code representation



Error Code Representation

Glass

90 Min

Rapid

E1

off

Off

On

E3

Off

On

On

E4

On

Off

Off

E6

On

On

Off

E7

On

On

On