The transit bolts are put in place to avoid drum displacement due to vehicle
Transit bolts are used to secure the drum in place to prevent any damage whilst in transit. The drum of the washing machine will damage the electronic components if it were to swing freely.

Failure to remove the transit bolts prior to use, will result in excessive vibration or shaking (the machine will literally jump around the room), and will damage your machine & void your warranty.

Removing your transit Bolts:
1. Loosen the 4 bolts with a spanner & then remove the transit bolts.
2. Insert the hole plugs/covers.
3. Store the transit bolts for future transportation.

We recommend keeping the transit bolts for future use and refitting them if the unit is to be transported, failure to refit these prior to transport will also void your warranty.